Drill and Tap

Drill and Tap

Other stem processing and fabrication services we offer at our various locations include drilling, punching, bevelling, threading as well as rebar cutting and forming. 

Contact us at any of the branches for more detailed information.

See below for detailed processing capabilities.
TMC 4500
  • Bevel up to 45 degrees
  • Machine capable to drill
  • 4” diameter hole
  • 4” thick material
  • Machine capable at the moment
  • Tap ¼” to 1-5/8” diameter hole
  • Drill ¼” to 1-5/8” diameter hole
  • 4” thick material
  • 1 plasma torch (up to 2” thk material)
  • 1 oxy torch (2” to 8” thk material)
  • Camera used for alignment
  • Effective cutting length = 101’-4”
  • Effective cutting Width = 10’-6”
  • Overall length = 126’-11-3/4”
  • Overall width = 14’-3-1/2”
ACCURPRESS 7150026
  • 1500 TONNAGE/26’ OVERALL
  • 111 TONS/FT UP TO 10FT
  • ADJUSTABLE DIE 2-1/4” TO 12”
  • NON ADJUSTABLE DIE 1” & 1-3/4”
MPC -1
  • 1 plasma torch (up to 2” thk material)
  • Camera used for alignment
  • Effective cutting length = 121’-6”
  • Effective cutting width = 10’6”
  • Overall length = 130’
  • Overall width = 16’7”
MPC – MINI
  • Plasma (1 torch) (up to 2” thk material)
  • Oxy (2 torch) (2” to 8” thk material)
  • Spacing between torches 6-3/4” – 48” (depending on size of what is being cut)
  • Camera used for alignment
  • Effective cut length = 49’-6”
  • Effective cut width = 10’-6”
  • Overall length = 60’-2”
  • Overall width = 16’-6-1/2”

TOOLING

ANGLE HEIGHT OF PUNCH TONS/FT RADIUS
SAMPLE PUNCH 90 DEGREES 3.7450” 30 0.0320”
GN 10 85 DEGREES 3.736” 35 0.75”
UP 4 85 DEGREES 3.736” 35-60 0.187”
UP 6 85 DEGREES 3.7190” 65-100 0.75”
  • Distance pass the post is 22’ between arm supports (22’)
  • Distance from center of bottom die to arm support is 22”
  • Overall height = 16’
  • Overall width = 26’
Share by: